1. Inspect and Clean

1. 1. Confirm part description, any available ID #’s  as well as interchange information on work order matches the part and any special instructions have been completed
   2. Check for broken/ missing components
      1. Broken mounting tabs
      2. Missing, broken or worn dials / buttons
      3. Cut wires or broken plugs
   3. Remove any plug-in wires at their connection point
   4. Wipe and dust the component avoiding heavy liquid usage
      1. Polish any interior facing lenses

2. Tagging and Identification

1. 1. Stock number or PO number should be engraved or written on hidden/inward facing portion of part only

3. Shipping

1. 1. All electronic components must be boxed
   2. At least 1-2 inches worth of packing space should surround the unit inside the box
      1. To quickly assess your box size: Use your index, middle, and ring finger as a minimum width-check between the outer box wall and the mirror