1. Inspect and Clean

1. 1. Confirm part description as well as interchange information on work order matches the part and any special instructions have been completed
   2. Inspect the unit for cracks/damage to casings or housing, and any cut wiring or damaged/missing sensors, mounts or any other external parts
   3. Use properly sized red plugs to cover any critical openings
   4. Thoroughly wash and degrease as necessary to remove dirt and debris

2. Tagging and Identification

1. 1. Stock number or PO number should be engraved or written on the part

3. Shipping

1. 1. All small mechanical parts must be boxed
   2. At least 2 inches worth of packing space should surround the unit inside the box
      1. To quickly assess your box size: Use your index, middle, and ring finger as a minimum width check between the outer box wall and the part