Wheels
Shipping GuidePart Preparation & Shipping Guidelines
1. Inspect and Clean
-
- Confirm part description and interchange information on work order matches the part and any special instructions have been completed
- All tires (unless otherwise noted or SPARE) must be removed from wheel prior to shipping
- Visibly inspect the front and back lips for any bends
- Thoroughly wash and degrease as necessary to remove dirt and debris
- Wheels should be polished to minimize any surface imperfections
2. Tagging and Identification
-
- Stock number or PO number should be engraved or written using small lettering on the inside of the wheel close to the valve stem when possible
3. Shipping
-
- Un-finished steel wheels do not require boxing or wrapping
- Consider using a small pallet when sending 3 or more wheels to a customer
- Steel wheels with a cladding finish are not required to be boxed but must be covered with protective wrapping and padding on the finished portion.
- B grade aluminum/finished wheels must be covered with protective wrapping and padding on the finished portion.
- A grade aluminum wheels must be protected and boxed.
- At least 1-2 inches worth of packing space should surround the unit inside the box
- Un-finished steel wheels do not require boxing or wrapping
> Shipping Guide