Small Mechanical
Power Steering Pump, Alternator, ABS, Compressor, etc
Shipping GuidePart Preparation & Shipping Guidelines
1. Inspect and Clean
-
- Confirm part description as well as interchange information on work order matches the part and any special instructions have been completed
- Inspect the unit for cracks/damage to casings or housing, and any cut wiring or damaged/missing sensors, mounts or any other external parts
- Use properly sized red plugs to cover any critical openings
- Thoroughly wash and degrease as necessary to remove dirt and debris
2. Tagging and Identification
-
- Stock number or PO number should be engraved or written on the part
3. Shipping
-
- All small mechanical parts must be boxed
- At least 2 inches worth of packing space should surround the unit inside the box
- To quickly assess your box size: Use your index, middle, and ring finger as a minimum width check between the outer box wall and the part
> Shipping Guide